HYCHEM C
General Description:
This product is a water soluble corrosion inhibitor which has been specifically formulated to prevent corrosion resulting from the used water based on completion fluids. It can be applied at varying concentrations according to protect life required for the completion fluid.

Specification:

Appearance (700 F) : Pale yellow liquid
Specific Gravity (600 F) : 1.01 gr/l
Flash Point 0 F : Above 200 0 F
Solubility : Crude Oil: Insoluble
Fresh Water: Soluble

Method & Standard Use:
This product can be applied for waste water treatment or clean water through Jar Test (Laboratory Scale), which the result will ve converted into the field scale and appropriate with the burden of pollution and the total water which will be processed.

Delivery:
This product is non-hazardous liquid and shipped in plastics drum to customers by using lorry tank with 10-20 tons capacity, packed in a plastic jerry can 35 kg's or plastic drum 250 kilograms.

Storage:
This product must be kept in a dry place.

Work Safety:
1. Eye and skin contact can cause an irritation.
2. Skin direct contact can cause feel a little hot.

Use Direction:
Hychem C can be applicable in the field with dosage variation depends on the characteristic of waste and standard water which will be treated, 50-2,000 mg/l. Mixing process must be continued; if not it becomes sediment.

Type of Industries:
This product is used for corrosive inhibitor only.

:: back to top

© Copyright 2005 Gametri Tirta Lestari. All Rights Reserved.